Users Manual

Configure the device.

• Connect the USB port on a USB to Ethernet adapter. to the DataMiner and the Ethernet to your PC.
• Power the device .
• Open a browser and enter 192.168.0.1 as the URL.
• Enter username "admin" and password "greenbean".
• Enter your GUID.
• Make other changes if desired, however, they should not be required.

Useful Tips

• Disconnecting power from the DataLogger may result in lost data. It is recommended turn off the device either by using the USB to Ethernet adapter or via your admin panel.
• Be sure that you are not connected to another network when plugging connecting your PC into the device to ensure that your browser uses it as its source.
• For a new device, you may instead configure a switch to utilize 192.168.1.0 as the gateway instead of using a USB to Ethernet adapter.  Note that this will not work if you have previously changed the devices IP.